SHS - Single Hopper Scale
TecnoBilance
The single hopper scales are used for measuring (SHS / C for control) or for regulating (SHS / D for regulation or dosing) of the flow rate of flowing granular products.
The “SHS/ C” Control Scale
Allows the instant flow measurement and the counting of the total quantity of product.
The “SHS/ D” Dosing Scale
Allows the regulation of the flow rate based on the required set-point and the counting of the total quantity of product.
Communication with supervision system
The SHS scale allows communication with a remote supervision system for the control and reading of machine data, allowing the possible development of a management system for flow analysis, yield calculation and storage of the totalizers. The available protocols are:
- None (the machine works in “stand alone” mode)
- Modbus RTU (RS232) - SLAVE configured
- Modbus TCP (Ethernet) - SLAVE configured
- PROFIBUS protocol - Optional
- PROFINET protocol - Optional
Model
A
mm
B
mm
C
mm
D Ø
mm
Weight
kg
Flow
m3/h
Power Supply
AC
Freq.
Hz
Power
VA
Air Cons.
Nl/min
Pressure
bar
SHS040
1780
1200
150
200
200
13
110/230
50/60
60
26.0
6
SHS080
1930
1200
200
200
240
26
110/230
50/60
60
28.7
6
SHS120
2130
1250
200
250
260
38
110/230
50/60
60
38.5
6
SHS160
2330
1300
320
250
295
44.5
110/230
50/60
60
42.2
6
Model
A
mm
B
mm
C
mm
D Ø
mm
Weight
kg
Flow
m3/h
Power Supply
AC
Freq.
Hz
Power
VA
Air Cons.
Nl/min
Pressure
bar
SHS040
1780
1200
150
200
200
13
110/230
50/60
60
26.0
6
SHS080
1930
1200
200
200
240
26
110/230
50/60
60
28.7
6
SHS120
2130
1250
200
250
260
38
110/230
50/60
60
38.5
6
SHS160
2330
1300
320
250
295
44.5
110/230
50/60
60
42.2
6